Already a subscriber? 
MADCAD.com Free Trial
Sign up for a 3 day free trial to explore the MADCAD.com interface, PLUS access the
2009 International Building Code to see how it all works.
If you like to setup a quick demo, let us know at support@madcad.com
or +1 800.798.9296 and we will be happy to schedule a webinar for you.
Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
BS EN 12566-6:2016 Small wastewater treatment systems for up to 50 PT - Prefabricated treatment units for septic tank effluent, 2016
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols, units and abbreviated terms [Go to Page]
- 3.1 Terms and definitions
- 3.2 Symbols and abbreviated terms
- 4 Products characteristics [Go to Page]
- 4.1 Design [Go to Page]
- 4.1.1 General
- 4.1.2 Overall dimensions
- 4.1.3 Inlets, outlets, internal pipework and connections
- 4.1.4 Access
- 4.2 Load bearing capacity
- 4.3 Secondary treatment efficiency [Go to Page]
- 4.3.1 General
- 4.3.2 Secondary treatment efficiency ratio
- 4.3.3 Microorganism reduction
- 4.4 Watertightness
- 4.5 Power consumption
- 4.6 Durability [Go to Page]
- 4.6.1 General
- 4.6.2 Concrete, steel, PVC-U, PE, GRP, PDCPD and flexible sheets
- 4.7 Reaction to fire [Go to Page]
- 4.7.1 General
- 4.7.2 Units classified as Class A1 without the need for testing
- 4.7.3 Units classified according to the test results
- 4.8 Dangerous substances
- 5 Testing, assessing and sampling methods [Go to Page]
- 5.1 Load bearing capacity [Go to Page]
- 5.1.1 Generals
- 5.1.2 Load bearing capacity determined by calculation [Go to Page]
- 5.1.2.1 General
- 5.1.2.2 Backfill loads
- 5.1.2.3 Hydrostatic loads
- 5.1.2.4 Pedestrian loads
- 5.1.3 Load bearing capacity determined by testing
- 5.2 Secondary treatment capacity
- 5.3 Watertightness
- 6 Assessment and verification of constancy of performance (AVCP) [Go to Page]
- 6.1 General
- 6.2 Type testing [Go to Page]
- 6.2.1 General
- 6.2.2 Test samples, testing and compliance criteria
- 6.2.3 Test reports
- 6.2.4 Shared other party results
- 6.2.5 Cascading determination of the product type results
- 6.3 Factory production control (FPC) [Go to Page]
- 6.3.1 General
- 6.3.2 Requirements [Go to Page]
- 6.3.2.1 General
- 6.3.2.2 Equipment
- 6.3.2.3 Raw materials and components
- 6.3.2.4 Traceability and marking
- 6.3.2.5 Controls during manufacturing process
- 6.3.2.6 Product testing and evaluation
- 6.3.2.7 Non-complying products
- 6.3.2.8 Corrective action
- 6.3.2.9 Handling, storage and packaging
- 6.3.3 Product specific requirements
- 6.3.4 Initial inspection of factory and of FPC
- 6.3.5 Continuous surveillance of FPC
- 6.3.6 Procedure for modifications
- 6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity
- 7 Classification and designation (Nominal designation)
- 8 Marking, labelling and packaging [Go to Page]
- 8.1 Marking
- 8.2 Technical information accompanying the unit
- 8.3 Installation instructions
- 8.4 Operation and maintenance instructions [Go to Page]
