eLibrary >
ISO 8100-20:2018 Lifts for the transport of persons and goods - Part 20: Global essential safety requirements (GESRs) >
ISO 8100-20:2018 Lifts for the transport of persons and goods - Part 20: Global essential safety requirements (GESRs), 2018
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviated terms
- 4 Approach and methodology
- 4.1 Background
- 4.2 Approach
- 4.3 Methodology
- 5 Understanding and implementing GESRs
- 5.1 Overall objective
- 5.2 Use of GESRs
- 5.2.1 Basis
- 5.2.2 Ways of using GESRs
- 5.2.3 Applicability of GESRs
- 5.2.4 Safety objectives of GESRs
- 5.2.5 Verification of compliance
- 5.3 Use of this document
- 5.3.1 Users
- 5.3.2 Standards writers
- 5.3.3 Designers, manufacturers, installers, and maintenance, repair and service organizations
- 5.3.4 Inspection and testing bodies
- 6 Global essential safety requirements (GESRs)
- 6.1 General
- 6.2 Common GESRs related to persons at different locations
- 6.2.1 Supports for lift equipment
- 6.2.2 Lift maintenance and repair instructions
- 6.2.3 Equipment inaccessible to users and non-users
- 6.2.4 Floors of the LCU and working areas
- 6.2.5 Hazards due to relative movement
- 6.2.6 Locking landing doors and closing LCU doors
- 6.2.7 Evacuation
- 6.2.8 Sharp edges
- 6.2.9 Hazards arising from the risk of electrical shock
- 6.2.10 Electromagnetic compatibility
- 6.2.11 Illumination of the LCU and the landings
- 6.2.12 Effects of earthquakes
- 6.2.13 Hazardous materials
- 6.2.14 Environmental influences
- 6.3 GESRs related to persons adjacent to the lift
- 6.3.1 Falling into the well (hoistway)
- 6.4 GESRs related to persons at entrances
- 6.4.1 Access and egress
- 6.4.2 Horizontal sill-to-sill gap
- 6.4.3 Alignment of the LCU and the landing
- 6.4.4 Self-evacuation from the LCU
- 6.4.5 Gap between the landing doors and the LCU doors
- 6.4.6 Means to reopen doors when the LCU is at the landing
- 6.5 GESRs related to persons in the LCU
- 6.5.1 Strength and size
- 6.5.2 LCU support/suspension
- 6.5.3 Overloaded LCU
- 6.5.4 Falling from the LCU
- 6.5.5 LCU travel path limits
- 6.5.6 Uncontrolled movement of the LCU
- 6.5.7 LCU collision with objects in or beyond the travel path
- 6.5.8 LCU horizontal or rotational motion
- 6.5.9 Change of speed or acceleration
- 6.5.10 Objects falling on the LCU
- 6.5.11 LCU ventilation
- 6.5.12 Fire/smoke in the LCU
- 6.5.13 LCU in flooded areas
- 6.5.14 Stopping means inside the LCU
- 6.5.15 Landing and controls indication
- 6.6 GESRs related to persons in working areas
- 6.6.1 Working area(s) or space(s)
- 6.6.2 Accessible equipment
- 6.6.3 Access to and egress from working spaces in the well (hoistway)
- 6.6.4 Strength of working area(s)
- 6.6.5 Restrictions on equipment in lift spaces
- 6.6.6 Falling from working areas
- 6.6.7 LCU movement under control of an authorized person
- 6.6.8 Uncontrolled or unintended equipment movement inside the well (hoistway)
- 6.6.9 Means of protection from various hazards
- 6.6.10 Falling objects in the well (hoistway)
- 6.6.11 Electric shock in working spaces
- 6.6.12 Illumination of working spaces
- Annex A (informative) Overview of GESRs in relation to lift subsystems
- Annex B (informative) Requirements relevant to the EU market
- Annex C (informative) Comparison of GESRs with EHSRs of LD and MD
- Bibliography [Go to Page]