eLibrary >
ISO/IEC 29157:2015 Information technology - Telecommunications and information exchange between systems - PHY/MAC specifications for short-range wireless low-rate applications in the ISM band >
Expand All
TOC Search:
ISO/IEC 29157:2015 Information technology - Telecommunications and information exchange between systems - PHY/MAC specifications for short-range wireless low-rate applications in the ISM band, 2015
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviated terms
- 5 Overview
- 6 Interlayer service specification
- 6.1 Overview
- 6.2 General format of management primitives
- 6.2.1 MLME-GET.request and PLME-GET.request
- 6.2.2 MLME-GET.confirm and PLME-GET.confirm
- 6.2.3 MLME-SET.request and PLME-SET.request
- 6.2.4 MLME-SET.confirm and MLME-SET.confirm
- 6.3 MLME-SAP
- 6.3.1 MLME-GET.request
- 6.3.2 MLME-GET.confirm
- 6.3.3 MLME-MASTER-START.request
- 6.3.4 MLME-MASTER-START.confirm
- 6.3.5 MLME-RESET.request
- 6.3.6 MLME-RESET.confirm
- 6.3.7 MLME-SCAN.request
- 6.3.8 MLME-SCAN.confirm
- 6.3.9 MLME-SET.request
- 6.3.10 MLME-SET.confirm
- 6.4 MAC-SAP
- 6.4.1 MAC-DATA.request
- 6.4.2 MAC-DATA.confirm
- 6.4.3 MAC-DATA.indication
- 6.5 PLME-SAP
- 6.5.1 PLME-GET.request
- 6.5.2 PLME-GET.confirm
- 6.5.3 PLME-SET.request
- 6.5.4 PLME-SET.confirm
- 6.5.5 PLME-RESET.request
- 6.5.6 PLME-RESET.confirm
- 6.6 PD-SAP
- 6.6.1 PD-DATA.request
- 6.6.2 PD-DATA.confirm
- 6.6.3 PD-DATA.indication
- 7 MAC PDU format
- 7.1 MPDU of beacon frame (BF)
- 7.1.1 Open flag (OF, 2 bits)
- 7.1.2 MAC version (6 bits)
- 7.1.3 Address mode (ADDM, 2 bits)
- 7.1.4 PHY version (6 bits)
- 7.1.5 Frame type (8 bits)
- 7.1.6 Superframe mode control (SFMC, 2 bits)
- 7.1.7 Upper layer frame size (ULPS, 6 bits)
- 7.1.8 Source MAC address (64 bits)
- 7.1.9 Superframe counter (SFC, 4 bits)
- 7.1.10 Middleframe counter (FC, 4 bits)
- 7.1.11 Hopping sequence (32 bits)
- 7.1.12 Beacon frequency table (BFT, 16 bytes)
- 7.1.13 Upper layer data (16 bytes)
- 7.1.14 TCRC16 (16 bits), MCRC16 (16 bits)
- 7.2 MPDU of fast beacon frame (FBF)
- 7.2.1 Open flag (OF, 2 bits)
- 7.2.2 MAC version (6 bits)
- 7.2.3 Address mode (ADDM, 2 bits)
- 7.2.4 PHY version (6 bits)
- 7.2.5 Frame type (8 bits)
- 7.2.6 Superframe mode control (SFMC, 2 bits)
- 7.2.7 Upper layer frame size (ULPS, 6 bits)
- 7.2.8 Source MAC address (64 bits)
- 7.2.9 Superframe counter (SFC, 4 bits)
- 7.2.10 Middleframe counter (SC, 4 bits)
- 7.2.11 Hopping sequence (32 bits)
- 7.2.12 Beacon frequency table (BFT, 16 bytes)
- 7.2.13 Upper layer data (16 Bytes)
- 7.2.14 TCRC16 (16 bits), MCRC16 (16 bits)
- 7.3 MPDU of request control frame (RCF)
- 7.3.1 Open flag (OF, 2 bits)
- 7.3.2 MAC version (6 bits)
- 7.3.3 Address mode (ADDM, 2 bits)
- 7.3.4 PHY version (6 bits)
- 7.3.5 Frame type (8 bits)
- 7.3.6 Upper layer frame size (ULPS, 6 bits)
- 7.3.7 Source MAC address (64 bits)
- 7.3.8 Destination MAC address (64 bits)
- 7.3.9 Upper layer data
- 7.3.10 TCRC16 (16 bits), MCRC16 (16 bits)
- 7.4 MPDU of master control frame (MCF)
- 7.4.1 Open flag (OF, 2 bits)
- 7.4.2 MAC version (6 bits)
- 7.4.3 Address mode (ADDM, 2 bits)
- 7.4.4 PHY version (6 bits)
- 7.4.5 Frame type (8 bits)
- 7.4.6 Upper layer frame size (ULPS, 6 bits)
- 7.4.7 Source MAC address (64 bits)
- 7.4.8 Destination MAC address (64 bits)
- 7.4.9 Upper layer data
- 7.4.10 TCRC16 (16 bits), MCRC16 (16 bits)
- 7.5 MPDU of RCF acknowledge control frame (RACF)
- 7.6 MPDU of MCF acknowledge control frame (MACF)
- 7.7 MPDU of payload frame (PF)
- 7.7.1 Open flag (OF, 2 bits)
- 7.7.2 MAC version (6 bits)
- 7.7.3 Address mode (ADDM, 2 bits)
- 7.7.4 PHY version (6 bits)
- 7.7.5 Frame type (8 bits)
- 7.7.6 Upper layer frame size (ULPS, 6 bits)
- 7.7.7 Source MAC address (64 bits)
- 7.7.8 Destination MAC address (64 bits)
- 7.7.9 Upper layer data
- 7.7.10 TCRC16 (16 bits), MCRC16 (16 bits)
- 8 MAC functional description
- 8.1 General description
- 8.2 System state diagram
- 8.3 Protocol structure
- 8.3.1 Middleframe structure
- 8.3.2 Superframe structure
- 8.4 Frequency operation
- 8.4.1 Frequency hopping control
- 8.4.2 Frame frequency mapping
- 8.4.3 Frequency diversity and time diversity
- 8.4.4 Orthogonal frequency offset
- 8.4.5 Frequency selection
- 9 PHY specification
- 9.1 General requirements
- 9.1.1 Operating frequency range
- 9.1.2 Frequency assignment
- 9.1.3 Frequency synthesizer stabilisation time
- 9.1.4 Frequency synthesizer turn off time
- 9.2 PHY protocol data unit (PPDU) format
- 9.2.1 Lock time
- 9.2.2 Preamble
- 9.2.3 Header (48 bits)
- 9.2.4 Message
- 9.2.5 EoF delimiter
- 9.3 Modulation and codes
- 9.3.1 Modulation
- 9.3.2 Codes
- 9.4 Transmitter specification
- 9.4.1 Pulse shaping filter
- 9.4.2 Transmitter power spectrum mask
- Annex A (informative) Pico-net Light-weight Architecture Security (PLAS) [Go to Page]