eLibrary >
ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass >
ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass, 2016
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols
- 5 Factors to be taken into account when testing glass
- 5.1 Glass as a material
- 5.1.1 General
- 5.1.2 Effect of surface condition
- 5.1.3 Effect of rate of loading
- 5.1.4 Effect of test surface area
- 5.1.5 Effect of ambient medium
- 5.1.6 Effect of aging
- 5.1.7 Effect of temperature
- 5.2 Bending stress and bending strength
- 5.2.1 General
- 5.2.2 Effective stress
- 5.2.3 Equivalent bending strength
- 5.2.4 Profile bending strength
- 5.3 Types of glass
- 5.3.1 General
- 5.3.2 Patterned glass
- 5.3.3 Laminated glass
- 5.4 Orientation of the specimens
- 5.5 Number of specimens in a sample
- 6 Explanations of the test methods
- 6.1 Coaxial double ring test for large test surface areas
- 6.1.1 Elimination of edge effects
- 6.1.2 Analysis of the stress development
- 6.1.3 Testing of patterned glass
- 6.2 Test with specimen supported at two points (four point bending)
- 6.1.4 Limitations
- 6.1.5 Inclusion of edge effects
- 6.1.6 Analysis of the stress development
- 6.3 Coaxial double ring test for small test surface areas
- 6.1.7 Elimination of edge effects
- 6.1.8 Analysis of the stress development
- 7 Range of application of the test methods
- 7.1 General limitations
- 7.2 Limitations to ISO 1288‑2
- 7.3 Limitations to ISO 1288‑3
- 7.4 Limitations to ISO 1288‑4
- 7.5 Limitations to ISO 1288‑5
- 8 Calibration of the testing machines
- 9 Recommendations for safe use of test equipment
- Bibliography [Go to Page]