eLibrary >
ISO 17901-2:2015 Optics and photonics - Holography - Part 2: Methods for measurement of hologram recording characteristics >
ISO 17901-2:2015 Optics and photonics - Holography - Part 2: Methods for measurement of hologram recording characteristics, 2015
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and abbreviated terms
- 5 Principles
- 6 Measurement methods
- 6.1 General
- 6.2 Definition of the Coordinate System
- 6.3 Hologram recording environment
- 6.4 Measurement device and apparatus
- 6.5 Exposure characteristics curve measurement method for recording of the hologram
- 6.6 Exposure at half-maximum measurement method for recording of the hologram
- 6.7 Method to measure the R-value of the hologram
- 6.8 Method to measure the amplitude of refractive index modulation of the hologram
- 6.8.1 General
- 6.8.2 Measurement using the transmission hologram
- 6.8.3 Measurement using the reflection hologram
- 7 Description of measurement results
- 7.1 General
- 7.2 Description of the information concerning the object to be measured
- 7.3 Description of the measurement results on the exposure characteristics curve and exposure at half-maximum for hologram recording
- 7.4 Description of the R-value measurement result of the hologram
- 7.5 Description of the measurement result of refractive index modulation of the hologram
- Annex A (informative) Assembly procedure and stability confirmation of hologram recording optical system based on double-beam interference
- Annex B (informative) Hologram recording procedure
- Annex C (informative) Relationship between the hologram and interference fringes due to double-beam interference [Go to Page]