eLibrary >
ISO 8100-2:2019 Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components >
ISO 8100-2:2019 Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components, 2019
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 List of significant hazards
- 5 Design rules, calculations, examinations and tests
- 5.1 General provisions for type examinations of safety components
- 5.1.1 Object and extent of the tests
- 5.1.2 General provisions
- 5.2 Type examination of landing and car door locking devices
- 5.2.1 General provisions
- 5.2.2 Examination and tests
- 5.2.3 Test particular to certain types of locking devices
- 5.2.4 Type examination certificate
- 5.3 Type examination of safety gear
- 5.3.1 General provisions
- 5.3.2 Instantaneous safety gear
- 5.3.3 Progressive safety gear
- 5.3.4 Comments
- 5.3.5 Type examination certificate
- 5.4 Type examination of overspeed governors
- 5.4.1 General provisions
- 5.4.2 Check on the characteristics of the overspeed governor
- 5.4.3 Type examination certificate
- 5.5 Type examination of buffers
- 5.5.1 General provisions
- 5.5.2 Samples to be submitted
- 5.5.3 Test
- 5.5.4 Type examination certificate
- 5.6 Type examination of safety circuits containing electronic components and/or programmable electronic systems (PESSRAL)
- 5.6.1 General provisions
- 5.6.2 Test samples
- 5.6.3 Tests
- 5.6.4 Type examination certificate
- 5.7 Type examination of ascending car overspeed protection means
- 5.7.1 General provisions
- 5.7.2 Statement and test sample
- 5.7.3 Test
- 5.7.4 Possible modification to the adjustments
- 5.7.5 Test report
- 5.7.6 Type examination certificate
- 5.8 Type examination of unintended car movement protection means
- 5.8.1 General provisions
- 5.8.2 Statement and test sample
- 5.8.3 Test
- 5.8.4 Possible modification to the adjustments
- 5.8.5 Test report
- 5.8.6 Type examination certificate
- 5.9 Type examination of rupture valve/one-way restrictor
- 5.9.1 General provisions
- 5.10 Guide rails calculation
- 5.10.1 Range of calculation
- 5.10.2 Bending
- 5.10.3 Buckling
- 5.10.4 Combination of bending and compression/tension or buckling stresses
- 5.10.5 Flange bending
- 5.10.6 Deflections
- 5.11 Evaluation of traction
- 5.11.1 General
- 5.11.2 Traction calculation
- 5.11.3 Formulae for a general case (see Figure 9)
- 5.12 Evaluation of safety factor on suspension ropes for electric lifts
- 5.12.1 General
- 5.12.2 Equivalent number, Nequiv, of pulleys
- 5.12.3 Safety factor
- 5.13 Calculations of rams, cylinders, rigid pipes and fittings
- 5.13.1 Calculation against over pressure
- 5.13.2 Calculations of the jacks against buckling
- 5.14 Pendulum shock tests
- 5.14.1 General
- 5.14.2 Test rig
- 5.14.3 Tests
- 5.14.4 Interpretation of the results
- 5.14.5 Test report
- 5.15 Electronic components — Failure exclusion
- 5.16 Design rules for programmable electronic systems (PESSRAL)
- 6 Use of ISO/TS 8100-3
- Annex A (normative) Model form of type examination certificate
- Annex B (normative) Programmable electronic systems in safety related applications for lifts (PESSRAL)
- Annex C (informative) Example for calculation of guide rails
- Annex D (informative) Calculation of traction — Example
- Annex E (informative) Equivalent number of pulleys, Nequiv — Examples
- Annex F (informative) Relationship between ISO 22559-1 and ISO 8100-2
- Bibliography [Go to Page]