eLibrary >
ISO 8124-5:2015 Safety of toys - Part 5: Determination of total concentration of certain elements in toys >
ISO 8124-5:2015 Safety of toys - Part 5: Determination of total concentration of certain elements in toys, 2015
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 Reagents and apparatus
- 5.1 Reagents
- 5.2 Apparatus
- 5.2.1 Microwave digestion system
- 5.2.2 High pressure microwave digestion vessel
- 6 Selection and composition of test portions
- 6.1 Selection of test portions
- 6.2 Compositing of test portions
- 7 Preparation of test portions
- 7.1 Coatings of paint, varnish, lacquer, printing ink, polymer and similar coatings
- 7.2 Polymeric and similar materials, including laminates, whether textile-reinforced or not, but excluding other textiles
- 7.3 Paper, paperboard and cardboard
- 7.4 Natural or synthetic textiles
- 7.5 Other materials, whether mass-coloured or not
- 7.6 Materials intended to leave a trace
- 7.7 Pliable modelling materials, including modelling clays, and gels
- 7.8 Paints, including finger paints, varnishes, lacquers, and similar materials, in solid or liquid form
- 7.8.1 Materials in solid form
- 7.8.2 Materials in liquid form
- 7.9 Metallic materials whether or not partly coated
- 8 Digestion of test portions and instrumental analysis
- 8.1 Microwave digestion
- 8.1.1 If the instrumental analysis technique is ICP-MS
- 8.1.2 If the instrumental analysis technique is ICP-AES
- 8.1.3 Microwave digestion conditions
- 8.1.4 Cooling and dilution
- 8.2 Hot plate and hot block digestion of test portion
- 8.2.1 If the instrumental analysis technique is ICP-AES
- 8.2.2 If the instrumental analysis technique is ICP-MS
- 9 Detection limits of the instrumental method
- 10 Expression of results
- 11 Test report
- Annex A (informative) Background and rationale
- Bibliography [Go to Page]