1. Scope

1.1 This terminology defines terms related to the compatibility and sensitivity of materials in oxygen enriched atmosphere. It includes those standards under the jurisdiction of ASTM Committee G04.

1.2 The terminology concentrates on terms commonly encountered in and specific to practices and methods used to evaluate the compatibility and sensitivity of materials in oxygen. This evaluation is usually performed in a laboratory environment, and this terminology does not attempt to include laboratory terms.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D2863 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

G63 Guide for Evaluating Nonmetallic Materials for Oxygen Service

G72 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

G74 Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact

G86 Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments

G88 Guide for Designing Systems for Oxygen Service

G93 Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments

G94 Guide for Evaluating Metals for Oxygen Service

G114 Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service

G120 Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction

G121 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents

G122 Test Method for Evaluating the Effectiveness of Cleaning Agents

G124 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres

G125 Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants

G127 Guide for the Selection of Cleaning Agents for Oxygen Systems

G128 Guide for Control of Hazards and Risks in Oxygen Enriched Systems

G131 Practice for Cleaning of Materials and Components by Ultrasonic Techniques

G136 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

G144 Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer

G145 Guide for Studying Fire Incidents in Oxygen Systems

Keywords

Compatibility; Oxygen-enriched systems/environments; Sensitivity criterion/response; Terminology;

ICS Code

ICS Number Code 01.040.13 (Environment and health protection. Safety (Vocabularies)); 13.230 (Explosion protection)

DOI: 10.1520/G0126-00

ASTM International is a member of CrossRef.