eLibrary >
ISO 19277:2018 Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation >
ISO 19277:2018 Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation, 2018
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Performance testing design
- 4.1 Relationship between artificial testing and natural exposure
- 4.2 Laboratory tests
- 4.3 Additional laboratory tests
- 5 CUI classification environments
- 6 Test samples
- 6.1 Test panels
- 6.2 Steel substrates
- 6.3 Sampling of coatings
- 6.4 Number of test panels
- 6.5 Coating systems
- 6.5.1 Coating application
- 6.5.2 Dry film thickness
- 6.5.3 Overcoating interval
- 6.5.4 Conditioning
- 6.5.5 Heat conditioning
- 6.6 Scribe
- 6.7 Reference system
- 7 Test procedures and assessment
- 7.1 Assessment and acceptance
- 7.2 Assessment of adhesion and artificial ageing
- 7.2.1 Adhesion testing before artificial ageing
- 7.2.2 Artificial ageing
- 7.2.3 Adhesion testing after artificial ageing
- 7.3 Thermal cycling test
- 7.4 Multi-phase CUI cyclic corrosion test
- 7.4.1 Description of test
- 7.4.2 Test equipment-apparatus
- 7.4.3 Test set-up and preparation
- 7.4.4 Test procedure
- 7.4.5 Acceptance
- 8 Optional tests
- 8.1 Optional cryogenic cycling testing
- 8.1.1 General
- 8.1.2 Cryogenic test
- 8.1.3 Adhesion testing after cryogenic test aging
- 8.2 Optional vertical pipe test
- 8.2.1 Application
- 8.2.2 Description of test
- 8.2.3 Test equipment — Apparatus
- 8.2.4 Test process scope
- 8.2.5 Temperature profile calibration
- 8.2.6 Test equipment — Procedure
- 8.3 Additional performance tests
- 9 Test report
- Annex A (informative) Corrosion testing of conditioned and heat conditioned test samples
- Annex B (informative) Example of test report for CUI coating acceptance
- Annex C (informative) Example of test report for cryogenic testing
- Annex D (informative) Example of test report for optional vertical pipe test
- Bibliography [Go to Page]